Product Information:

Module Name: Double H-bridge Motor Drive Module
Working mode: H-bridge drive (dual channel)
Main control chip: L298N
Logic voltage: 5V
Drive voltage: 5V-35V
Logic current: 0mA-36mA
Drive current: 2A (MAX single bridge)
Storage temperature: -20 ℃ to+135 ℃
Maximum power: 25W
Weight: 30g
Peripheral dimensions: 43 * 43 * 27mm
Product features:
This module uses ST’s L298N as the main driver chip, which has the characteristics of strong driving ability, low heat generation, and strong anti-interference ability.
This module can be powered by the built-in 78M05 through the driving power supply, but to avoid damage to the voltage regulator chip, when using a driving voltage greater than 12V, please use an external 5V logic power supply.
This module uses large capacity filtering capacitors and freewheeling protection diodes to improve reliability.
★ This module is in stock all over the place, please take a photo directly, thank you
matters needing attention:
When your driving voltage (marked as 12V input in the above figure, the actual acceptable input range is 7-12V) is 7V
-At 12V, the onboard 5V logic power supply can be enabled. After using the onboard 5V power supply, the+5V in the interface
Power supply does not require input voltage, but can provide 5V voltage for external use. (This is a regular application!)
2. When the driving voltage is higher than 12V and less than or equal to 24V (the chip manual states that it can support up to 35V, but according to the specifications)
The maximum voltage support for conservative applications up to 24V is already impressive When, for example, to drive a rated voltage of
An 18V motor. Firstly, the jumper cap that enables the onboard 5V output must be removed. Then connect 5V externally to the 5V output port
5V enable refers to a control signal with a voltage level of 5V. When this signal is valid and the power supply in the motor drive module is normal, the motor drive module outputs current. Otherwise, even if the power supply is normal, there will be no current on the motor.
Voltage supplies power to the internal logic circuit of L298N. (This is an unconventional application driven by high voltage!)

If you have any questions, then kindly please contact us via the ‘Ask a question’ Tab which is located on the bottom of the listing page.

Customers Note:

Our customer satisfaction is at the top of our priority. We aim to provide a pleasant shopping experience for all of our customers. If there are any questions or problems, then kindly please contact us via an ‘eBay’ message and we take every effort to answer all of the queries put forward for us within 24 hours. If for some reason you are not fully satisfied with your purchase, then please do not leave negative feedback before contacting us as we will resolve the issue for you.

If you are interested in more products then kindly please have a look at our eBay shop.

Thank You for shopping with us and we hope to see you soon!