RGB Full Color LED SMD Module

RGB Full Color LED SMD Module
The KY-009 RGB Full Color LED module emits a range of colors by mixing red, green, and blue light. Each color is adjusted by using PWM.

Compatible with popular electronics platforms like Arduino, Raspberry Pi and ESP32.

KY-009 Fritzing custom part image
KEYES KY-009 RGB full color LED SMD module for Arduino
KY-009 Specifications
This module consists of a 5050 SMD LED and 4 male header pins. Use with limiting resistors to prevent LED burnout.

Operating Voltage 5V max
Red 1.8V ~2.4V
Green 2.8V ~ 3.6V
Blue 2.8V ~ 3.6V
Forward Current 20mA ~ 30mA
Operating Temperature -25°C to 85°C [-13°F ~ 185°F]
Board Diemsions 18.5mm x 15mm [0.728in x 0.591in]
Connection Diagram
Connect the red pin (R) to Pin 9, the green pin (G) to pin 10, the blue pin (B) to pin 11 and finally the ground pin (-) to GND.

You must use resistors between the board and the Arduino to prevent LED burnout.

KY-009 Breadboard Arduino
R 180Ω resistor Pin 9
G 110Ω resistor Pin 10
B 110Ω resistor Pin 11
– GND